HONGYANG GROUP Hungary Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Hungary Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

M-G FUEL DISPENSER

M-G

M-G FUEL DISPENSER

FlowMeterType :Optional

Accuracy :±0.2%

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight :65kg

Dimension(L×W×H) :680*540*895(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 44 20ft: 22

products links

links

technical archives

    causing noise and abnormal vibration is many, either because of fuel dispenser�or exterior elements (pipe trouble). Therefore, it is first to exclude exterior reason of fuel dispenser, then interior one when overcome the above situation. After that, examine strainer and clean dirty. Next parts being checked is overflow valve. Tight spring will stick valve core and generate large noise and vibration. In addition, don’t pursue large flow rate through adjusting spring extensively, since that will shorten the service life of fuel dispenser due to large system pressure. If noise is still large after the above maintenance, pump should be disassembled so as to examine vane and spring whether broken. If these parts are broken the outlet flow fluctuation of pump would be enhanced, as well as noise and vibration. The solution method is to change a new vane and spring. Leakage Leakage is divided as two categories, namely, inner leakage and ou fuel dispenser ter leakage. Under the high oil pressure in hydraulic system oil is leak from high pressure area to low area, which is called inner leakage. The abrasion of vane, rotor and frame result in extensive inner leakage so as to reduce delivery volume of fuel dispenser. The outer leakage is the one oil leak from inner hydraulic system into outer, which increase unsafe environmental elements except from affecting the normal working performance of pump. To change a new oil seal when find a leakage coming from the root of pump axis. Be sure that don’t make a mistake in installing oil seal. Diagram 2-7 show the correct position ----- the labium of oil seal should face to inner chamber. In addition, tight V wheel also hurts the surface of oil seal next to pump axis so that its capacity is invalid. Diagram 2-7 The most leaking sections are the connecting face---- between pump cover and pump frame, between pump frame and vapor separator, place of cap nut of overflow valve. All of reasons are damaged seal loop or seal gasket, thus change new sealed components as soon as quickly. fuel dispenser fuel dispenser

technical specification

    cladding or covers of electrical equipment designed to give access to any manual means of   disconnection is permitted.   Any manual means of disconnection shall be readily accessible by designated and trained personnel.   The means of disconnection shall ensure that:   a) all external power cables up to the means of disconnection can be tested between each phase and earth and   between phases; and   b) all metering pumpdispenser power cables and apparatus within the hazardous area can be tested between the   power circuit and earth.   5.3.2.4 Cables used in hazardous areas   Cables used in hazardous areas shall comply with either EN 60079-14 and HD21.13 S1 or   EN 60079-14 and HD22.4 S3 or be tested in accordance with 6.1.4 and shall meet the following requirements:  fuel dispenser   a) when tested according to 6.1.4.2 there shall be no significant deterioration of the sheath or surface texture and   no splits or cracks; and   b) when tested according to 6.1.4.3 the sample shall show no evidence of splitting or cracking and no electrical   breakdown shall occur; and   c) when tested according to 6.1.4.4 the sample shall show no evidence of splitting or cracking; and   d) when tested according to 6.1.4.5 no electrical breakdown shall occur and the measured values of insulation   resistance shall be not less than 100 M �; and   e) when tested according to 6.1.4.6 there shall be no ignition of the gas within the outer chamber.   5.3.2.5 Insulation and isolation   In order to avoid danger from sources of electrical energy capable of causing shock and also in   5.3.2.5.1   hazardous areas from non- fuel dispenser fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    d of overseeing the killing of thousands of civilians, was flown from Sierra Leone to the Netherlands, where he is to be tried for war crimes at a UN-backed Special Court at The Hague. See article Israel, which had been trying to join since the 1930s, and Palestine have been admitted as members of the Red Cross. The breakthrough was helped by a change of symbol from the traditional red cross to a more neutral red square. International donors approved, in principle, emergency aid payments for three months to the Palestinians to keep vital services going. Whether they approve more, in particular for Palestinian Authority salaries, may depend on whether Hamas, the Islamist group that runs the government, agrees to a “prisoners document�that takes some steps towards recognising Israel. The same day that one lot of Iraqi gunmen (probably Shia militiamen) murdered one of Saddam Hussein s defence lawyers, others (probably Sunni fuel dispenser insurgents) abducted about a hundred factory workers on their way home in buses just north of Baghdad, raising fears of yet another sectarian massacre. After capturing Mogadishu, Somalia s capital, Islamist militias continued to advance to the north and west. Somalia s interim president, Abdullahi Yusuf, claimed that they were being helped by thousands of foreign extremists. See article China s prime minister, Wen Jiabao, visited seven African countries, including AP South Africa and Angola, looking for deals to buy oil and commodities that would cement China s position as Africa s biggest trading partner. © 2006 . About sponsorship Business this week Jun 22nd 2006 From The Economist print edition The management of EADS, Airbus s parent company, met to consider the aeronautics and defence company s difficulties. An announcement of more delays to the A380 super-jumbo had sent its share price into a spin. Regulators in France started an investigation into the timing of a fuel dispenser fuel dispenser